Recycling & Mining Magnets
Electromagnets and Permanent magnets can be either manual clean or self-clean. They are versatile suspended magnets for the value-minded customer. These magnets can be confidently employed in a variety of applications such as: mining, aggregate, recycling, foundry,construction, demolition as well as wood processing. These magnets are good for all around magnetic protection against larger tramp material such as bucket teeth and drill bits from aggregate and coal, as well as separation of small ferrous objects such as nails and staples from construction debris.
Easy Installation
- Mounts to any width CEMA idler.
- No holes to drill.
- Installation in just a few minutes to customers idler.
Simple Calibration
- Calibration accomplished via instructions that appear on Large Graphical Display (5.25” x 1.5”).
- Simple Step–by–Step instructions through the calibration process.
- Speed Sensor mounts to any adjacent idler via special “tri-fold” bolt.
- Large oversize NEMA 4x fiberglass enclosure with lockable latch.
Standard Features
- 4 Inputs: Remote Clear, Print Ticket, etc.
- 4 Outputs: Under / Over Speed, Rate or Tons, Pulse per Ton, etc.
- 4-20 mA Output (16 bit): Chart Recorder, Production Control, etc.
- Accepts 110/220 VAC and 12-24 VDC
- Power Protection both Under and Over (85 to 264 VAC)
- RS 232: Printer, etc.
- Ethernet: PLC, PC, Remote Display, HTTP Web Server
- 2 Year Limited Warranty
Accurate and Reliable
- Solid steel construction with durable powder coating for protection.
- Heavy Duty Steel Load Cells temperature compensated for accuracy during wide temperature ranges.
- High speed processor and surface mount circuitry components for long reliable operation.
Models
- Model 150 (Typically 50 to 250 TPH)*
- Model 250 (Typically 250 to 750 TPH)*
- Model 500 (Typically above 750 TPH)*
- Model HD (Designed for CEMA E and F Idlers)*
- Model CIT (Designed for Channel Insert Idlers)*
Accurate and Reliable
Introducing two (2) new models specifically designed to easily mount on the popular Wing type idler found on many portable / tracked equipmentThe
Weigh Shark WING B is designed to mount on side discharge conveyors with tube frame construction. A shaft encoder with magnetic coupler quickly attaches to the head pulley. The Weigh Shark integrator used with all their scales is included. The integrator features a Graphical Display that provides simple to follow instructions for easy calibration.The
Weigh Shark WING C is designed to mount on the C-Channel frame support of the main conveyor. Simply remove the idler and install the scale. Mount the idler on the scale. The standard Weigh Shark speed sensor mounts to the scale assembly to monitor belt speed directly off the belt. The Weigh Shark integrator is included.More information and photos on the new Wing Conveyor Belt Scales to come.
Application Form
